Epson PowerLite 810p Quick Start - Page 2

Adjust the image 1 Remove the lens cap and rotate the focus ring to sharpen the image. zoom ring focus ring EPSON PowerLite 600p/800p/810p 3 Raise the image as needed. To do this, press the foot release button and lift the front of the projector. Once the image is positioned where you want it, release the button to lock the foot in position. If you need to straighten the image, rotate the round adjustable foot at the back of the projector. back adjustable foot Note: If you see a blank screen see the box below. after focusing, 2 Rotate the zoom ring to reduce or enlarge the image. (You can also move the projector closer to or farther from the screen.) 4 If your image looks like or , press the Sync+ or Sync- (vertical Keystone) button to correct the shape of the image. 5 If your image looks like or , you've placed the projector at an angle to the screen. Move it directly in front of the center of the screen, facing the screen squarely. Or press the Tracking+ or Tracking- (horizontal Keystone) button to correct the shape. If you see a blank screen If you see a blank screen or the No Signal message after turning on your laptop, check the following: Make sure the power light is green and not flashing and the lens cover is off. If you're using a Macintosh: 1. From the Apple menu, select Control Panels, then click Monitors or Monitors and Sound. 2. Click the Arrange icon. Try turning off the laptop and restarting it. click here If you've connected more than one computer and/or video source, you may need to press the Computer/YCbCr or Video button on top of the projector. (Allow a few seconds for the projector to sync up after pressing it.) drag one monitor icon on top of the other Make sure your cable is connected securely. If you're using a Windows laptop: Press the function key that lets you display on an external monitor. It may have an icon such as , or it may be labelled CRT/LCD. You may have to hold down the Fn (function) key while pressing it. (Allow a few seconds for the projector to sync up after pressing it.) Check your laptop's manual or online help for details. On most systems, the or CRT/LCD key lets you toggle between the LCD screen and the projector, or display on both at the same time. You might need to use the Display utility in the Control Panel to enable both the LCD screen and external monitor port. 3. Drag one monitor icon on top of the other. This lets you display on the projector screen as well as the LCD screen. If this option isn't available, you may need to select one of the Simulscan resolution settings: 1. Perform step 1 above, if necessary. 2. Click the Monitor icon. click here select a Simulscan resolution 3. Select a Simulscan resolution as shown. (Allow a few seconds for the projector to sync up after making the selection.) EPSON is a registered trademark of SEIKO EPSON CORPORATION. PowerLite is a registered trademark of Epson America, Inc. Copyright © 2001 by Epson America, Inc. Printed in USA 7/01 CPD-12789