Epson PowerLite 83 Operation Guide - EMP Monitor v4.30 - Page 24

Monitoring window layout The icon patterns and their meanings are explained below. Type: Displays the projector status. No warnings or problems*1 Warning or problem An error has occurred on the projector. Notification The projector requires immediate attention. Monitoring disabled The projector is not being monitored. If you right-click the icon and select Monitoring enabled, the projector will be added to the projectors that are being monitored. Data being updated Network error (monitor password authentication error) No Monitor Password was entered when the projector was registered, or an incorrect Monitor Password was entered. s p.12, p.15, p.17 Network error (TCP connection error)*2 Network error (ESC/VP.net communication error)*3 Group name: When projectors are registered to a group, the name of the group that the projector belongs to is displayed. Display name: Shows the display name. Power: Shows the power on status for the projector. Power on and normal status Power on and abnormal status Power off and normal status Power off and abnormal status Lamp Hours: Shows the lamp operating time for the projector. Temperature level: The following five icons display the differing internal temperature status of the projector. 24 Internal temperature normal High-temperature warning Internal temperature normal Internal temperature error High-temperature warning Error information: Shows a notification or warning/problem status using the following icons. Clean Air Filter Notice Lamp Cover Open Replace Lamp*4 Lamp Error High-temperature warning Lamp failure at power on Replace Air Filter High internal temperature error No Air Filter Internal Error Low Air Flow Fan error Air Flow Sensor Err. Sensor error Low air flow error Supply System Error (Ballast) Air filter air flow sensor error Other error Auto Iris Error