Epson PowerLite 92 Quick Setup
Epson PowerLite 92 Manual
 |
View all Epson PowerLite 92 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson PowerLite 92 manual content summary:
- Epson PowerLite 92 | Quick Setup - Page 1
PowerLite® 92/93 Quick Setup Before using the projector, make sure you read the safety instructions in the User's Guide on your projector CD. Camera, USB Device, or Epson Document Camera DC-06 Connect a digital camera, USB flash drive, USB storage device, or Epson document camera DC-06 to the - Epson PowerLite 92 | Quick Setup - Page 2
the manual from your projector CD. View the guide by clicking the icon for it on your computer desktop. Telephone Support Services To use the Epson PrivateLine® Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card included with your projector. This service is - Epson PowerLite 92 | Quick Setup - Page 3
PowerLite® 92/93 Installation rapide Avant d'utiliser le projecteur, assurez-vous de lire les instructions de sécurité dans le Guide ou visitez le site Web www.epson.ca/support et sélectionnez votre projecteur. Mettez S-Vidéo Câble audio Câble vidéo composantes-VGA Câble audio Câble HDMI 4 Appuyez - Epson PowerLite 92 | Quick Setup - Page 4
tre étiquetée CRT/LCD ou peut être Web www.epson.ca/support pour obtenir Guide de l'utilisateur sur le CD du projecteur. Epson et EasyMP sont des marques déposées et Epson Exceed Your Vision est un logo déposé de Seiko Epson Corporation. PowerLite et PrivateLine sont des marques déposées d'Epson
-
1 -
2 -
3 -
4
 |
 |
Quick Setup
Before using the projector, make sure you read the safety instructions in the
User’s Guide
on your projector CD.
Connect the projector
Choose from the following connections:
Computer USB Port
Connect a computer using a USB cable.
Connect the square end of the USB cable to the projector’s
USB
TypeB
(square) port. Connect the flat end of the cable to any USB port on
your computer.
Windows
®
2000 SP4 or later:
After turning on the projector, follow the on-
screen instructions to install the Epson USB Display software (EMP_UDSE.EXE;
only on first connection).
Note:
If the software screen does not display automatically, open
My
Computer
or
Computer
,
then double-click
EPSON_PJ_UD
. If it still does not
display, access the projector’s
Extended
menu and select
USB Display
as the
USB Type B
setting. See the
User’s Guide
on your projector CD for instructions.
Mac OS
®
X 10.5.1 or higher:
After turning on the projector, the setup folder
for USB Display appears in the Finder. Double-click
USB Display Installer
and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
Computer Monitor Port
Connect a computer using the VGA cable that came with the projector.
Connect one end of the cable to the projector’s
Computer1
or
Computer2
port, and the other end to your computer’s
monitor port. If you are using
a notebook, switch it to external display (see “Troubleshooting”). You can also
connect an audio cable.
Video Device
Connect up to 5 video devices and use the
Source Search
button on the
projector or remote control to switch between them. (All cables are optional.)
RCA video cable (composite video)
Component video to VGA cable
Audio cable
S-Video cable
Audio cable
HDMI cable
Camera, USB Device, or Epson Document Camera DC-06
Connect a digital camera, USB flash drive, USB storage device, or Epson
document camera DC-06 to the projector’s USB
TypeA
(flat) port.
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector’s
Slideshow
feature. See the
User’s Guide
on your projector
CD for details.
External Monitor and External Speakers
You can also connect an external monitor and external speakers to your
projector to enhance your presentations. See the
User’s Guide
on your projector
CD for details.
Wired Network Monitoring (PowerLite 93)
You can connect the projector to your network using an Ethernet
®
cable so you
can monitor and control the projector over the network. See the
User’s Guide
on your projector CD for details.
To monitor and control your projector over the network, download and install
the EasyMP
®
Monitor software and manual from the Epson support web site.
You can install links to the download pages from your projector CD, or go to
www.epson.com/support
(U.S.) or
www.epson.ca/support
(Canada) and
select your projector.
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector.
The power light on the projector turns orange.
3
Open the
A/V Mute
slide all the way.
4
Press the
power button on the projector or remote control. The power
light flashes green, then stays on.
Power button
Power light
Note:
To shut down the projector, press the
power button twice, then
unplug it. You don’t have to wait for the projector to cool down.
5
The default language of the menu system is
English
. To select another
language, press the
Menu
button on the remote control. Select
Extended
and press
Enter
. Select
Language
and press
Enter
. Select your
language and press
Enter
. Press the
Menu
to exit the menu system.
PowerLite
®
92/93