Epson PowerLite 92 Quick Setup - Page 1

PowerLite® 92/93 Quick Setup Before using the projector, make sure you read the safety instructions in the User's Guide on your projector CD. Camera, USB Device, or Epson Document Camera DC-06 Connect a digital camera, USB flash drive, USB storage device, or Epson document camera DC-06 to the projector's USB TypeA (flat) port. Connect the projector Choose from the following connections: Computer USB Port Connect a computer using a USB cable. Connect the square end of the USB cable to the projector's USB TypeB (square) port. Connect the flat end of the cable to any USB port on your computer. Windows® 2000 SP4 or later: After turning on the projector, follow the onscreen instructions to install the Epson USB Display software (EMP_UDSE.EXE; only on first connection). Note: If the software screen does not display automatically, open My Computer or Computer, then double-click EPSON_PJ_UD. If it still does not display, access the projector's Extended menu and select USB Display as the USB Type B setting. See the User's Guide on your projector CD for instructions. Mac OS® X 10.5.1 or higher: After turning on the projector, the setup folder for USB Display appears in the Finder. Double-click USB Display Installer and follow the on-screen instructions to install the Epson USB Display software (only on first connection). Computer Monitor Port Connect a computer using the VGA cable that came with the projector. Connect one end of the cable to the projector's Computer1 or Computer2 port, and the other end to your computer's monitor port. If you are using a notebook, switch it to external display (see "Troubleshooting"). You can also connect an audio cable. If you connect a digital camera, USB flash drive, or USB storage device, you can use the projector's Slideshow feature. See the User's Guide on your projector CD for details. External Monitor and External Speakers You can also connect an external monitor and external speakers to your projector to enhance your presentations. See the User's Guide on your projector CD for details. Wired Network Monitoring (PowerLite 93) You can connect the projector to your network using an Ethernet® cable so you can monitor and control the projector over the network. See the User's Guide on your projector CD for details. To monitor and control your projector over the network, download and install the EasyMP® Monitor software and manual from the Epson support web site. You can install links to the download pages from your projector CD, or go to www.epson.com/support (U.S.) or www.epson.ca/support (Canada) and select your projector. Turn on your equipment 1 Turn on your computer or video source. 2 Plug in the projector. The power light on the projector turns orange. 3 Open the A/V Mute slide all the way. Video Device Connect up to 5 video devices and use the Source Search button on the projector or remote control to switch between them. (All cables are optional.) RCA video cable (composite video) S-Video cable Audio cable 4 Press the power button on the projector or remote control. The power light flashes green, then stays on. Power button Power light Component video to VGA cable Audio cable HDMI cable Note: To shut down the projector, press the power button twice, then unplug it. You don't have to wait for the projector to cool down. 5 The default language of the menu system is English. To select another language, press the Menu button on the remote control. Select Extended and press Enter. Select Language and press Enter. Select your language and press Enter. Press the Menu to exit the menu system.