Epson PowerLite 97H Operation Guide - EasyMP Network Updater - Page 32
Solving Problems When Updating, Solutions When You Cannot Update Firmware or Copy Menu Settings
View all Epson PowerLite 97H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
• Check the computer's network settings. • Enable LAN settings on your computer. Check Control Panel > System > Hardware > Device Manager. Parent topic: Solving Network Connection Problems Solving Problems When Updating See the following section for solutions to problems that may occur when updating. Solutions When You Cannot Update Firmware or Copy Menu Settings Parent topic: Solving Problems Solutions When You Cannot Update Firmware or Copy Menu Settings • Check that the computer is connected to the network. • Check that EasyMP Network Updater was running at the scheduled update time. • If the projector's Standby Mode is set to Communication Off and the projector is off, the firmware cannot be updated and the menu settings cannot be copied. Change the Standby Mode to Communication On. Go to Extended > Standby Mode or ECO > Standby Mode. • The firmware or configuration file may be corrupted. Download the firmware or copy the menu settings again, and then try again. • If the update is not performed at the specified time, check that the schedule has not been canceled. Canceled schedules remain in the Schedule List and their status reads Finish. • Start Now is unavailable when Set the Time is selected. Clear the Set the Time checkbox. • If the network settings are changed after creating a projector list, the firmware cannot be updated and menu settings cannot be copied because the information for the projectors registered to the projector list and the projector's actual settings differ. Click Refresh on the Projector List Edit screen to update the projector information. • On a DHCP network, if the time taken to assign network information is too short, the projector's network information may change during update and you may not be able to update the firmware or copy menu settings. When updating the firmware or copying menu settings, try a longer time setting. • When the Windows Security Alert appears to confirm the Firewall setting while searching for the projectors, allow access to the EasyMP Network Updater. Parent topic: Solving Problems When Updating 32