Epson PowerLite D6250 Quick Setup - Page 1

PowerLite® D6150/D6155W/D6250 Quick Setup Before using the projector, make sure you read the safety instructions in the User's Guide on your projector CD. Connect the projector Choose from the following connections: Computer Monitor Port Connect a computer using the VGA cable that came with the projector. Connect one end of the cable to the projector's Computer1 or Computer2 port, and the other end to your computer's � monitor port. If you are using a notebook, switch it to external display (see "Troubleshooting"). You can also connect an audio cable. See the User's Guide on your projector CD for details. Wired Network You can connect the projector to your network using an Ethernet® cable. Camera, USB Device, or Epson Document Camera DC-06 Connect a digital camera, USB flash drive, USB storage device, or Epson document camera DC-06 to the projector's USB TypeA (flat) port. If you connect a digital camera, USB flash drive, or USB storage device, you can use the projector's Slideshow feature. See the User's Guide on your projector CD for details. External Monitor and External Speakers You can also connect an external monitor and external speakers to your projector to enhance your presentations. See the User's Guide on your projector CD for details. Turn on your equipment 1 Turn on your computer or video source. 2 Plug in the projector. See "Project over a wired network" for instructions. Wireless Network You can connect the projector wirelessly over an 802.11b, 802.11g, or 802.11n wireless network using the optional Epson wireless LAN module. See "Project wirelessly"��o��n��t�h�e��b�a��c�k��o�f�t�h��is��s�h�e�e��t��f�o���r���i�n���s��t��r�u����c�t�io��n�s�. Video Device Connect up to 5 video devices and use the Source Search button on the projector or remote control to switch between them. (All cables are optional). See the User's Guide on your projector CD for details. RCA video cable (composite video) S-Video cable Audio cable Component video to VGA cable Audio cable HDMI cable The power light on the projector turns orange. 3 Press the power button on the projector or remote control. Power light Power button The power light flashes green, then stays on. Note: To shut down the projector, press the power button twice, then unplug it. You don't have to wait for the projector to cool down. 4 The default language of the menu system is English. To select another language, press the Menu button on the remote control. Select Extended and press Enter. Select Language and press Enter. Select your language and press Enter. Press the Menu button to exit the menu system. *412046400* *412046400*