Epson PowerLite Home Cinema 2000 Quick Setup and Warranty - Page 2
Adjust the image, Using the remote control, Viewing 3D images - projector
View all Epson PowerLite Home Cinema 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
5 The default language of the menu system is English. To select another language, press the Menu button on the projector or remote control. Select Extended and press Enter. Select Language and press Enter. Select your language and press Enter. Press the Menu button to exit the menu system. Adjust the image 1 If you don't see an image, press the Source button on the projector or one of the source buttons on the remote control to select the image source. Note: If you still see a blank screen or have other display problems, see the tips in "Troubleshooting". 2 To raise the image, press the foot release button and lift the front of the projector. Release the button to lock the foot in position. 3 Turn the zoom ring to reduce or enlarge the image. Using the remote control Make sure the batteries are installed as shown (two AA batteries). Turn projector on and off Control connected devices with HDMI Link Access projector menus Switch between 2D and 3D Choose which source to display Navigate projector menus Turn off projector display 4 Turn the focus ring to sharpen the image. 5 If your image looks like or , you've placed the projector off to one side of the screen at an angle. Place the projector directly in front of the center of the screen, facing the screen squarely. Or use the horizontal keystone slider on the projector to correct it. 6 Your projector automatically adjusts images that look like or , but if necessary you can press the or buttons on the projector to correct this. For more information on using the remote control, see the online User's Guide. Viewing 3D images To view 3D content, you must first connect a 3D-compatible video device to the HDMI port on your projector. 1 Turn on and begin playback on the 3D-compatible video device. Note: Make sure you set the video device to play content in 3D mode. 2 Press the 2D/3D button on the projector remote control to enable 3D viewing, if necessary. 3 Slide the power switch on your 3D glasses to the On position. Note: If the glasses don't automatically display 3D content, you may need to pair them with the projector. Move the glasses within 10 feet (3 m) of the projector, then press and hold the Pairing button on the 3D glasses for at least 3 seconds. The status light on the glasses will alternately flash green and red, then remain green for 10 seconds if pairing is successful. See the online User's Guide for more information on adjusting 3D images.