Epson PowerLite Home Cinema 2040 User Manual - Page 2

Adjust the image, Using the remote control, Viewing 3D images

Get Epson PowerLite Home Cinema 2040 PDF manuals and user guides View all Epson PowerLite Home Cinema 2040 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

5 Use the arrow buttons on the remote control to highlight any of the options on the Home screen that appears, then press Enter to select it. You can switch between projection sources and quickly access various adjustment options from this screen. 6 Your projector automatically adjusts images that look like or , but if necessary you can press the or buttons on the projector to correct it. Using the remote control Make sure the batteries are installed as shown (two AA batteries). 6 The default language of the menu system is English. To select another language, press the Menu button on the projector or remote control. Select Extended and press Enter. Select Language and press Enter. Select your language and press Enter. Press the Menu button to exit the menu system. Adjust the image 1 If you don't see an image, press the Source button on the projector or one of the source buttons on the remote control to select the image source. Note: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 2 To raise the image, press the foot release button and lift the front of the projector. Release the button to lock the foot in position. Turn projector on and off Control connected devices with HDMI Link Access projector menus Switch between 2D and 3D Choose which source to display Navigate projector menus Access the Home screen 3 Turn the zoom ring to reduce or enlarge the image. 4 Turn the focus ring to sharpen the image. For more information on using the remote control, see the online User's Guide. Viewing 3D images To view 3D content, you must first connect a 3D-compatible video device to one of the HDMI ports on your projector. You also need a pair of Epson® (part number V12H548006) or Epson-compatible RF 3D active shutter glasses. 1 Turn on and begin playback on the 3D-compatible video device. Note: Make sure you set the video device to play content in 3D mode. 2 Press the 2D/3D button on the remote control, if necessary. 3 Slide the power switch on your 3D glasses to the On position. 5 If your image looks like or , you may have placed the projector off to one side of the screen at an angle. Place the projector directly in front of the center of the screen, facing the screen squarely. If you can't move the projector, use the horizontal keystone slider on the projector to correct the image shape. Note: If the glasses don't automatically display 3D content, you may need to pair them with the projector. Move the glasses within 10 feet (3 m) of the projector, then press and hold the Pairing button on the 3D glasses for at least 3 seconds. The status light on the glasses will alternately flash green and red, then remain green for 10 seconds if pairing is successful.

  • 1
  • 2
  • 3
  • 4
5
Use the arrow buttons on the remote control to highlight any of the
options on the Home screen that appears, then press
Enter
to select it.
You can switch between projection sources and quickly access various
adjustment options from this screen.
6
The default language of the menu system is
English
. To select another
language, press the
Menu
button on the projector or remote control.
Select
Extended
and press
Enter
. Select
Language
and press
Enter
.
Select your language and press
Enter
. Press the
Menu
button to exit the
menu system.
Adjust the image
1
If you don’t see an image, press the
Source
button on the projector or
one of the source buttons on the remote control to select the image
source.
Note:
If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
Turn the zoom ring to reduce or enlarge the image.
4
Turn the focus ring to sharpen the image.
5
If your image looks like
or
, you may have placed the projector
off to one side of the screen at an angle. Place the projector directly in
front of the center of the screen, facing the screen squarely. If you can’t
move the projector, use the horizontal keystone slider on the projector to
correct the image shape.
6
Your projector automatically adjusts images that look like
or
,
but if necessary you can press the
or
buttons on the projector to
correct it.
Using the remote control
Make sure the batteries are installed as shown (two AA batteries).
Choose which source
to display
Turn projector
on and off
Control connected
devices with HDMI Link
Switch between
2D and 3D
Access the Home
screen
Navigate projector
menus
Access projector
menus
For more information on using the remote control, see the online
User’s Guide
.
Viewing 3D images
To view 3D content, you must first connect a 3D-compatible video device to
one of the HDMI ports on your projector. You also need a pair of Epson
®
(part
number V12H548006) or Epson-compatible RF 3D active shutter glasses.
1
Turn on and begin playback on the 3D-compatible video device.
Note:
Make sure you set the video device to play content in 3D mode.
2
Press the
2D/3D
button on the remote control, if necessary.
3
Slide the power switch on your 3D glasses to the
On
position.
Note:
If the glasses don’t automatically display 3D content, you may
need to pair them with the projector. Move the glasses within 10 feet
(3 m) of the projector, then press and hold the
Pairing
button on the
3D glasses for at least 3 seconds. The status light on the glasses will
alternately flash green and red, then remain green for 10 seconds if
pairing is successful.