Epson PowerLite Home Cinema 3000 User Manual - Page 130
Power light, Status light, Lamp light, Status and solution, High Altitude, temperature is not too hot
View all Epson PowerLite Home Cinema 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Power light Flashing blue Status light Varies Lamp light Temp light Off Flashing orange Off Flashing blue Off Orange Off Flashing blue Orange Off Status and solution Projector is too hot • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects • Clean or replace the air filter • Make sure the environmental temperature is not too hot Projector has overheated and turned off; leave it turned off to cool down for about five minutes, then do the following: • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects • Clean or replace the air filter • If operating the projector at high altitude, turn on High Altitude Mode • If the problem persists, unplug the projector and contact Epson for help Lamp has a problem • Check to see if the lamp is burned out, broken, or installed incorrectly; reseat or replace the lamp as necessary • Clean or replace the air filter • If operating the projector at high altitude, turn on High Altitude Mode • If the problem persists, unplug the projector and contact Epson for help 130