Epson PowerLite Home Cinema 3010 Start Here - Page 2

Adjust the image, Using the remote control, Project wirelessly - projector

Get Epson PowerLite Home Cinema 3010 PDF manuals and user guides View all Epson PowerLite Home Cinema 3010 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

Adjust the image 1 If you don't see an image, press the Source buttons on the projector or the remote control to select the image source. Note: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 2 To raise the image, adjust the front feet as shown below. Using the remote control Make sure the batteries are installed as shown (two AA batteries). 3 Turn the zoom ring to reduce or enlarge the image. Turn projector on Turn projector off Choose which source to display 4 Turn the focus ring to sharpen the image. Switch between 2D and 3D Access projector menus Navigate projector menus Turn off projector display 5 If your image looks like or , you've placed the projector off to one side of the screen at an angle. Use the horizontal keystone slider on the projector to correct it. Or place the projector directly in front of the center of the screen, facing the screen squarely. For more information on using the remote control, see the online User's Guide. Project wirelessly (PowerLite Home Cinema 3010e only) Follow these steps to use the included WirelessHD Transmitter (PowerLite Home Cinema 3010e only) to wirelessly transmit HD content to your projector. 6 Your projector automatically adjusts images that look like or , but if necessary you can press the or buttons on the projector to correct this. 1 Place the transmitter within 30 feet (10 m) of the projector. Make sure the front of the transmitter faces the front of the projector. See the online User's Guide for more information on the WirelessHD transmission range. Note: Do not place the transmitter on a metal surface, as this may interfere with the signal. 2 Plug the AC adapter into the transmitter and a wall outlet. 3 Connect an HDMI cable to your video device and the HDMI port on the side of the transmitter. 4 Turn on the power switch on the back of the transmitter. 5 Turn on your video device and begin playback. 6 Turn on the projector. 7 Press the button on the projector remote control. See the online User's Guide for more information on adjusting and configuring the WirelessHD connection.

  • 1
  • 2
  • 3
  • 4
Adjust the image
1
If you don’t see an image, press the
Source
buttons on the projector or
the remote control to select the image source.
Note:
If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
2
To raise the image, adjust the front feet as shown below.
3
Turn the zoom ring to reduce or enlarge the image.
4
Turn the focus ring to sharpen the image.
5
If your image looks like
or
, you’ve placed the projector off to
one side of the screen at an angle. Use the horizontal keystone slider on
the projector to correct it. Or place the projector directly in front of the
center of the screen, facing the screen squarely.
6
Your projector automatically adjusts images that look like
or
,
but if necessary you can press the
or
buttons on the projector to
correct this.
Using the remote control
Make sure the batteries are installed as shown (two AA batteries).
Choose which source
to display
Turn projector on
Access projector
menus
Turn off projector
display
Navigate projector
menus
Turn projector off
Switch between
2D and 3D
For more information on using the remote control, see the online
User’s
Guide
.
Project wirelessly
(PowerLite Home Cinema 3010e only)
Follow these steps to use the included WirelessHD Transmitter (PowerLite
Home Cinema 3010e only) to wirelessly transmit HD content to your projector.
1
Place the transmitter within 30 feet (10 m) of the projector. Make sure
the front of the transmitter faces the front of the projector. See the
online
User’s Guide
for more information on the WirelessHD transmission
range.
Note:
Do not place the transmitter on a metal surface, as this may
interfere with the signal.
2
Plug the AC adapter into the transmitter and a wall outlet.
3
Connect an HDMI cable to your video device and the HDMI port on the
side of the transmitter.
4
Turn on the power switch on the back of the transmitter.
5
Turn on your video device and begin playback.
6
Turn on the projector.
7
Press the
button on the projector remote control.
See the online
User’s Guide
for more information on adjusting and configuring
the WirelessHD connection.