Epson PowerLite Home Cinema 5020UB Quick Start - Page 1

Epson PowerLite Home Cinema 5020UB Manual

Get Epson PowerLite Home Cinema 5020UB PDF manuals and user guides View all Epson PowerLite Home Cinema 5020UB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 1 highlights

PowerLite® Home Cinema 5020UB Quick Setup Before using the projector, make sure you read the safety instructions in the online User's Guide. Choose a location Keep the projector level and place it at a height so its lens is even with the top or the bottom of the screen and is centered horizontally. If this isn't possible, use the keystone correction buttons on the projector to reposition the image (see "Adjust the image"). In order to view 3D images correctly, RF 3D glasses must be worn within 32 feet (10 m) of the projector. Use the image below to determine the viewing distance for 3D projection (the shading represents the 3D viewing area): Turn on your equipment 1 Turn on your video source. 2 Plug in the projector. 3 Turn on the power switch on the back of the projector. The button on the projector turns blue. power 4 Press the power button on the projector or the On button on the remote control. The power light flashes blue, and then stays on. See the online User's Guide for more information on where to place your projector. Connect the projector Connect up to 5 video devices and use the Source buttons on the projector or remote control to switch between them. HDMI cable RCA video cable Component video cable For additional connection types, see the online User's Guide. Note: To shut down the projector, press the power button on the projector twice or the Standby button on the remote control, then unplug it. You don't have to wait for the projector to cool down. 5 The default language of the menu system is English. To select another language, press the Menu button on the remote control. Select Extended and press Enter. Select Language and press Enter. Select your language and press Enter. Press the Menu button to exit the menu system. Adjust the image 1 If you don't see an image, press the Source buttons on the remote control or the button on the projector to select the image source. Note: If you still see a blank screen or have other display problems, see "Troubleshooting." 2 Turn the horizontal and vertical lens shift dials to adjust the image position and center it between the top and bottom of the screen. 3 To raise the image, adjust the front feet as shown below. *412379300* *412379300*

  • 1
  • 2
  • 3
  • 4
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online
User’s Guide
.
Choose a location
Keep the projector level and place it at a height so its lens is even with the top
or the bottom of the screen and is centered horizontally. If this isn’t possible,
use the keystone correction buttons on the projector to reposition the image
(see “Adjust the image”).
In order to view 3D images correctly, RF 3D glasses must be worn within 32 feet
(10 m) of the projector. Use the image below to determine the viewing distance
for 3D projection (the shading represents the 3D viewing area):
See the online
User’s Guide
for more information on where to place your
projector.
Connect the projector
Connect up to 5 video devices and use the
Source
buttons on the projector or
remote control to switch between them.
Component video cable
RCA video cable
HDMI cable
For additional connection types, see the online
User's Guide
.
Turn on your equipment
1
Turn on your video source.
2
Plug in the projector.
3
Turn on the power switch on the back of the projector. The
power
button on the projector turns blue.
4
Press the
power button on the projector or the
On
button on the
remote control. The power
light flashes blue, and then stays on.
Note:
To shut down the projector, press the
power button on the
projector twice or the
Standby
button on the remote control, then
unplug it. You don’t have to wait for the projector to cool down.
5
The default language of the menu system is
English
. To select another
language, press the
Menu
button on the remote control. Select
Extended
and press
Enter
. Select
Language
and press
Enter
. Select
your language and press
Enter
. Press the
Menu
button to exit the menu
system.
Adjust the image
1
If you don’t see an image, press the
Source
buttons on the remote
control or the
button on the projector to select the image source.
Note:
If you still see a blank screen or have other display problems, see
“Troubleshooting.”
2
Turn the horizontal and vertical lens shift dials to adjust the image
position and center it between the top and bottom of the screen.
3
To raise the image, adjust the front feet as shown below.
PowerLite
®
Home Cinema 5020UB
*412379300*
*412379300*