Epson PowerLite Home Cinema 600 Quick Start and Warranty - Page 2

Adjust the image 1 If you don't see an image, press the Source Search button on the projector or the remote control to select the image source.  Note: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 2 To raise the image, press the foot release button and lift the front of the projector. Release the button to lock the foot in position. Using the remote control Make sure the batteries are installed as shown (two AA batteries). Turn projector on and off Choose which source to display 3 Turn the zoom ring to enlarge or reduce the image. Access projector menus Navigate projector menus 4 Turn the focus ring to sharpen the image. 5 If your image looks like or , you may have placed the projector off to one side of the screen at an angle. Place the projector directly in front of the center of the screen, facing the screen squarely. If you can't move the projector, use the horizontal keystone slider to correct the image. 6 Your projector automatically adjusts images that look like or , but if necessary you can press the or button on the projector to correct it. Turn off projector display Get solutions to common problems For more information on using the remote control, see the online User's Guide. Troubleshooting If you see a blank screen or the No signal message after turning on your computer or video device, check the following: • Make sure the Status light on the projector is blue and not flashing, and the A/V Mute slide is open. • Press the Source Search button on the projector or the remote control to switch to the correct image source, if necessary. • If you're using a Windows® laptop, press the function key on your keyboard that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it (such as Fn + F7). Wait a moment for the display to appear. • If you're using a Mac laptop, open System Preferences and select Displays. Click the Arrangement tab and select the Mirror Displays checkbox. Where to get help Manual For more information about using the projector, click the icon on your desktop to access the online manual (requires an Internet connection). If you don't have a User's Guide icon, you can install it from the projector CD or go to the Epson website, as described on the back of this sheet. Telephone support services To use the Epson® PrivateLine® Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada). Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday, and 7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.