Epson PowerLite Pro Cinema 4040 Quick Setup - Page 1
Epson PowerLite Pro Cinema 4040 Manual
View all Epson PowerLite Pro Cinema 4040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
PowerLite® Pro Cinema 4040/6040UB Quick Setup Before using the projector, make sure you read the safety instructions in the online User's Guide. Choose a location Keep the projector level and place it at a height so its lens is even with the top or bottom of the screen and is centered horizontally. If this isn't possible, use the lens shift feature or the keystone correction button on the projector to reposition the image (see "Adjust the image"). In order to view 3D images correctly, RF 3D glasses must be worn within 32 feet (10 m) of the projector. Use the image below to determine the viewing distance for 3D projection (the shading represents the 3D viewing area): 3 Press the power button on the projector or the On button on the remote control. The shutter opens and the power light flashes blue, then stays on. Note: To shut down the projector, press the power button on the projector or the Standby button on the remote control, then press the button again to confirm, if necessary. Wait for cooldown to complete before unplugging the projector. 4 Use the arrow buttons on the remote control to highlight any of the options on the Home screen that appears, then press Enter to select it. You can display a QR code, switch between projection sources, and quickly access various adjustment options from this screen. See the online User's Guide for more information on where to place your projector. Connect video devices For additional connection types, see the online User's Guide. Connect multiple video devices and use the Source buttons on the remote control or the button on the projector to switch between them. HDMI cable Optical HDMI Note: When connecting a source that requires HDCP 2.2, you must use the HDMI1 port. Turn on your equipment 1 Turn on your video source. 2 Plug in the projector. 5 The default language of the menu system is English. To select another language, press the Menu button on the projector or remote control. Select Extended and press Enter. Select Language and press Enter. Select your language and press Enter. Press the Menu button to exit the menu system. Using the remote control Install the batteries as shown (two AA batteries). Turn projector on Choose which source to display Control connected sources with HDMI Link Adjust zoom, focus, and lens shift Access projector menus Turn projector off Turn off projector display Navigate projector menus For more information on using the remote control, see the online User's Guide.