Epson PowerLite Pro G5750WU Operation Guide - EasyMP Monitor v4.51 - Page 36
Procedures for new timer settings, Click Add on the Timer Settings window. The following
View all Epson PowerLite Pro G5750WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Using the control functions 36 Shows the current day in a red box. Days for which timer settings have been made are shown in bold. Click or month. C Timers to switch to the calendar for the previous or next Shows a list of the timer settings. The line colors in the Timers list have the following meanings: Current day's timer setting When some of the projectors in the group have timer setting enabled and others have it disabled for the current day's timer setting When the current day's timer setting is a disabled setting D Delete Timer setting for a day other than the current day E Close Lets you delete timer settings that have been selected from the timer list. F Edit Closes the Timer Settings window. G Add Lets you change the timer settings that have been selected from the timer list. If a group has been selected for status checking, the settings cannot be changed. Registers new timer settings. (See the next section for more information.) H Enabled/disabled Switches the timer settings that have been selected from the timer list between enabled and disabled. Procedures for new timer settings Procedure A Click "Add" on the Timer Settings window. The following window is displayed. At Operation, you can carry out the operations of turning the power on and off and switching the input sources, similarly for the control buttons on the main window. If you set the input source switching, the projector's power will turn on at the timer start time even if it is not on at the time. Because of this, it is not necessary to make two separate timer settings for turning the power on and switching the input source. B After completing the timer settings, click "OK". The timer settings that have been made will be registered and they can be checked in the displayed timer list.