Epson PowerLite Pro G6470WU Operation Guide - EasyMP Network Updater - Page 18
File Information, Select all, Set the Time, Register, Start Now, to start
View all Epson PowerLite Pro G6470WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
4. Click Show. The firmware information is displayed in File Information, and then a list of the projectors that support the selected firmware is displayed. 5. Do one of the following. • Select all projectors: Click Select all. • Specify the projectors you want to update: Select the projector's checkbox. 6. Select one of the following methods to update the firmware. • Schedule the update: Select Set the Time to set the date and time you want to perform the firmware update, and then click Register. • Update immediately: Clear the Set the Time checkbox, and then click Start Now to start the firmware update immediately. The firmware is updated at the date and time you set, and the LED indicator on the projector turns on. When the firmware update is complete, the projector turns off and it enters standby mode. While updating, you can check the firmware update status on the EasyMP Network Updater main screen. 18