Epson PowerLite Pro G6570WU User Manual - Page 190
A/V Mute Release, Remote Control Type
View all Epson PowerLite Pro G6570WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
Setting BNC Sync Termination Remote Control Type Inv Direction Button Startup Source Search A/V Mute Release Beep Lens Type Instant Off Options - Normal Simple - - A/V Mute All - Various lens model numbers Enabled Disabled Description Sets the termination for the signal from the BNC port (normally should be off unless analog termination such as for switchers is necessary) Select Normal to use the remote control that came with the projector or Simple to use a different Epson projector remote control and disable the remote control that came with the projector Enable this setting if you installed the projector on a ceiling and want to invert the arrow buttons on the control panel Automatically detects the image signal when you turn on the projector Select A/V Mute if you want to use only the A/V Mute button to turn off A/V mute, or select All to use any button to turn it off Turns on or off the beep that sounds when you turn the projector on or off Select the model number for the attached lens Select Enabled to place the projector into standby status after power off or Disabled to send the projector into standby status approximately 3 minutes after power off 190