Epson PowerLite S17 User Manual - Page 132
Power light, Status light, Lamp light, Status and solution, High Altitude, Lamp has a problem.
View all Epson PowerLite S17 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Power light Off Status light Lamp light Flashing blue Off Off Flashing blue Orange Flashing blue Light status varies Flashing orange Temp light Orange Off Light status varies Status and solution Projector has overheated and turned off. Leave it turned off to cool down. Once the Temp and Status lights turn off and the power light turns blue (after about five minutes), try the suggestions below: • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • Clean or replace the air filter. • If operating the projector at high altitude, turn on High Altitude Mode. • If the problem persists, unplug the projector and contact Epson for help. Lamp has a problem. • Check to see if the lamp is burned out, broken, or installed incorrectly. Reseat or replace the lamp as necessary. • Clean or replace the air filter. • If operating the projector at high altitude, turn on High Altitude Mode. • If the problem persists, unplug the projector and contact Epson for help. Replace the lamp soon to avoid damage. Do not continue using the projector. 132