Epson PowerLite W39 Quick Setup - Page 1

PowerLite® S39/X39/W39 Quick Setup Before using the projector, make sure you read the safety instructions in the online User's Guide. Note: Your product may differ from the illustrations on this sheet, but the instructions are the same. Connect the projector Choose from the following connections. See the sections below or the online User's Guide for details. Computer PowerLite W39 USB cable PowerLite S39/X39 HDMI cable VGA cable Audio cable USB cable HDMI cable VGA cable Audio cable HDMI port Connect one end of an HDMI cable to one of the projector's HDMI ports shown above and the other end to an HDMI port on your computer. Computer port Connect one end of a VGA cable to the projector's Computer1 or Computer2 port, and the other end to your laptop or computer's monitor port. Make sure to switch your laptop to external display (see "Troubleshooting" on the back of this sheet). You can also connect an audio cable. USB port Connect the square end of a USB cable to the projector's USB-B (square) port. Connect the flat end of the cable to any USB port on your computer. Windows Vista® or later: After turning on the projector, follow the on-screen instructions to install the Epson® USB Display software (EMP_UDSE.EXE; only on first connection). If the software screen does not display automatically, open My Computer, Computer, or This PC, then double-click EPSON_PJ_UD. OS X 10.7.x or higher: After turning on the projector, the setup folder for USB Display appears in the Finder. Double-click USB Display Installer and follow the on-screen instructions to install the Epson USB Display software (only on first connection). Video device Connect multiple video devices and use the Source Search button on the projector or remote control to switch between them. PowerLite W39 Component video to VGA cable HDMI cable RCA video cable (composite video) RCA audio cable PowerLite S39/X39 Component video to VGA cable HDMI cable RCA video cable (composite video) RCA audio cable USB device or Epson DC-07 document camera Connect a digital camera, USB flash drive, USB storage device, or Epson DC-07 document camera to the projector's USB-A (flat) port. PowerLite W39 PowerLite S39/X39 USB cable USB cable If you connect a digital camera, USB flash drive, or USB storage device, you can use the projector's PC Free feature. See the online User's Guide for details. Turn on your equipment 1 Turn on your computer or video source. 2 Plug in the projector. The power light on the projector turns blue. 3 Open the A/V Mute slide all the way. 4 Press the power button on the projector or remote control. The projector beeps, the Status light flashes blue, and then stays on. Note: To shut down the projector, press the power button twice.