Epson PriorityFAX 1000 Product Support Bulletin(s) - Page 8
Product Support Bulletin
View all Epson PriorityFAX 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
EPSON EPSON AMERICA, INC. Product Support Bulletin Subject: PriorityFax 1000 Equipment Error Codes Date: 3/7/90 Page: 1 of 3 PSB No: P-0061 Originator: VB This product support bulletin explains the procedure for reading and interpreting PriorityFax 1000 (PF1000) error codes. The PF1000 equipment error codes are listed under the "Error Codes" column in Table 1. When the PF1000 is in error mode, the buzzer sounds and the "ERROR' LED turns ON. Simultaneously pressing and holding the "FINE/PHOTO" and the "START/COPY" buttons until the buzzer stops sounding, sets the PF1000 into an error code display mode. In the error code display mode, the state of the "SENDING DOCUMENT", "RECEIVING DOCUMENT", "FINE", and "PHOTO" LEDs on the front panel reflect the error condition of the PF1000. If an LED is ON it represents a "1", if it is OFF it represents a "0". Use Columns 0 through 7 of Table 1 to interpret the error code. The LEDs display the error code in 2 parts. The state of the "ADD PAPER" LED, which changes in 5 second intervals, determines which part of the error code is being displayed. 1. When the "ADD PAPER" LED is ON the "PHOTO", "FINE", "RECEIVE DOCUMENT", and "SEND DOCUMENT LEDs represent columns 0, 1, 2, 3 of Table 1. 2. When the "ADD PAPER" LED is OFF the "PHOTO", "FINE", "RECEIVE DOCUMENT", and "SEND DOCUMENT LEDs represent the columns 4, 5, 6, 7 of Table 1.