Epson Pro L25000U Users Guide - Page 245

On/Standby Status (power) light light Flashing blue Off Laser light Off Temp light Off Filter light Off Blue Off Off Off Blue Flashing Off Off blue Flashing Flashing Off Off blue orange Flashing Off blue Flashing Off orange Flashing Off blue Orange Off Off Flashing Orange Off Off blue 245 Status and solution Preparing network monitoring. (Wait for the light to remain orange before unplugging the projector.) The shutter feature is enabled. Internal error. Turn off the projector, unplug the power cord, and contact Epson for help. A fan or sensor has a problem. Turn off the projector, unplug the power cord, and contact Epson for help. Projector is too hot. • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • Clean or replace the air filter. • Make sure the environmental temperature is not too hot. • If operating the projector at high altitude, turn on High Altitude Mode. • If the problem persists, unplug the projector and contact Epson for help. The laser has a problem. • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • Clean or replace the air filter. • If the problem persists, unplug the projector and contact Epson for help.