Epson R200 Product Information Guide - Page 5
EPSON Stylus Photo R200, If you need to replace another ink cartridge, repeat steps 5 - stylus photo ink cartridges
UPC - 010343849532
View all Epson R200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
EPSON Stylus Photo R200 Note: You can also use the Status Monitor to find out which cartridge is out of ink. See "Checking the Ink Supply" on page 4 for more information. 4. Lift up the cartridge cover. 7. Lower the cartridge into the holder, with the green circuit board facing the front. Then gently push the cartridge down until it clicks into place. 5. Press in the tab on the back of the cartridge and lift the cartridge out of the printer. Dispose of it carefully. 8. If you need to replace another ink cartridge, repeat steps 5 through 7 before continuing with step 9. 9. Close the cartridge cover. Warning: Keep ink cartridges out of the reach of children. If ink gets on your hands, wash them thoroughly with soap and water. If ink gets in your eyes, flush them thoroughly with water. 6. Unwrap the new ink cartridge. Caution: Don't touch the green circuit board or remove any labels. 10. Close the printer cover and press the H ink button. The printer begins charging the ink delivery system. The green P power light flashes and the printer makes noise. Charging takes about half a minute. When it's finished, the green P power light stops flashing and stays on, and the red H ink light goes out. Caution: Never turn off the printer while the green P power light is flashing, unless the printer hasn't moved or made noise for more than 5 mintues. Don't touch the green circuit board 11/03 EPSON Stylus Photo R200 - 5