Epson R220 Printer Basics - Page 32
Windows, Macintosh, You can also turn the printer off and wait overnight-this allows any dried ink - head cleaning
UPC - 010343855663
View all Epson R220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
4. When the green P power light stops flashing, make sure paper is loaded in the printer, then do one of the following: ■ Windows: Click Print nozzle check pattern, then click Print. ■ Macintosh: Click Confirmation, then click Next. The nozzle check pattern prints. 5. If the nozzle check pattern has no white lines or gaps (as shown below), click Finish. If the pattern has white lines or gaps (as shown below), click Clean to clean the print head again. If you don't see any improvement after cleaning three or four times, refer to "Problems and Solutions" on page 46. You can also turn the printer off and wait overnight-this allows any dried ink to soften-and then try cleaning the print head again. 32 Maintaining Your Printer
32
Maintaining Your Printer
4.
When the green
P
power light stops flashing, make sure paper is loaded in the
printer, then do one of the following:
■
Windows:
Click
Print nozzle check pattern
, then click
Print
.
■
Macintosh:
Click
Confirmation
, then click
Next
.
The nozzle check pattern prints.
5.
If the nozzle check pattern has no white lines or gaps (as shown below),
click
Finish
.
If the pattern has white lines or gaps (as shown below), click
Clean
to clean
the print head again.
If you don’t see any improvement after cleaning three or four times, refer to
“Problems and Solutions” on page 46.
You can also turn the printer off and wait overnight—this allows any dried ink
to soften—and then try cleaning the print head again.