Epson Runsense SF-810 User Manual - Page 38
Loading interval presets, on the Measurement screen
View all Epson Runsense SF-810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Measuring your workouts 3 Hold down D while measuring is stopped to reset the measurement results. Data measured up to that point is stored in the product's memory. You can check this data by pressing D on the Time screen. 3 Press C or D to highlight Mode, then press A. See "Viewing past workouts" on page 49. Loading interval presets 4 Press C or D to highlight Interval, then press A. 5 Press C or D to highlight one of the three presets, then press A. Loading interval presets 1 Press C on the Time screen to display the Measurement screen. GPS positioning starts, and the Measurement screen is displayed once positioning is complete. See "GPS positioning" on page 20. 2 Hold down B on the Measurement screen to display the Measure set. menu. 37
Measuring your workouts
37
3
Hold down
D
while measuring is stopped to
reset the measurement results. Data measured
up to that point is stored in the product’s
memory. You can check this data by pressing
D
on the Time screen.
See “Viewing past workouts” on page 49.
Loading interval presets
Loading interval presets
1
Press
C
on the Time screen to display the
Measurement screen.
GPS positioning starts, and the Measurement
screen is displayed once positioning is complete.
See “GPS positioning” on page 20.
2
Hold down
B
on the Measurement screen to
display the Measure set. menu.
3
Press
C
or
D
to highlight
Mode
, then press
A
.
4
Press
C
or
D
to highlight
Interval
, then press
A
.
5
Press
C
or
D
to highlight one of the three
presets, then press
A
.