Epson S80600 User Manual - Page 121
LCD screen message, Solution, Auto Media Adjust, Auto Nozzle Check, Platen Gap, Roll Type - service manual
View all Epson S80600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
LCD screen message Media Sensor Error Loaded media or sensor has a problem. Media Sensor Error Adjust manually? Roll Type Error Release and then reset the media loading lever, then match Roll Type setting to actual media. Press maintenance and perform Head Maintenance. Maintenance Request Replace Part Soon or Replace Part Now XXXXXXXXXX Solution Press the pause/cancel button to clear the message. The Auto Media Adjust, Auto Nozzle Check, and Media Adjust settings in Easy Media Setup are not available under the following conditions: • Loaded media is transparent or colored • Loaded media has an uneven surface • Loaded media bleeds through easily • Platen Gap setting is set to 2.5 • The printer is exposed to direct sunlight or interference from other ambient light sources If necessary, set the Auto Media Adjust, Auto Nozzle Check, and Media Adjust settings manually. Make sure the Roll Type setting matches the loaded roll type. This message is displayed when regular cleaning has not been performed for more than one month. The product part indicated is nearing or at the end of its service life. Contact Epson for support and provide them with the service code shown on the LCD screen. You must replace the part before printing again. If you continue to print, a call for service occurs. 121