Epson SP7900HDR Printer Guide - Page 83
Optimizing the Settings for Your Paper, Creating Paper Configurations
UPC - 010343872752
View all Epson SP7900HDR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Handling Paper and Other Media | 83 Optimizing the Settings for Your Paper When you choose a media type in your Epson printer software, the driver automatically determines the best settings for your paper. However, you may want to fine-tune how the printer handles various media-especially if you use non-Epson paper or a paper not supported by the driver. Use the paper configuration settings described below. You can create a special configuration, or group of settings, for each paper type (up to ten types) and select the desired configuration whenever you print on a particular stock. Note: Paper configurations are needed only for non-Epson media. Note: You can also create paper configurations using the Epson LFP Remote Panel installed from the printer software CD. Creating Paper Configurations To create a configuration for a specific paper type, make sure the paper you want to configure is loaded in the printer. Then follow these steps: 1. Press r Menu, then press u or d to select PAPER SETUP. 2. Press r, then press d to select CUSTOM PAPER. 3. Press r, then press d or u to select a paper configuration number (1 to 10). Press r to save the number setting. 4. Press d or u to select PAPER TYPE, then press r. Press d or u to select a media type, then press r. Press OK to save it. 5. Press l twice to go back to the previous menu. 6. Press d or u to select PLATEN GAP, then press r. Press the d button to select NARROW, STANDARD, WIDE, or WIDER. The STANDARD setting is recommended for most paper types. Press OK to save the setting, then press l to go back to the previous menu. 7. Press d or u to select THICKNESS PATTERN, then press r. Press OK to print the paper thickness pattern. A pattern similar to the following is printed: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Smallest gap 83