Epson Stylus 800 Product Support Bulletin(s) - Page 2
The Stylus 800 printer uses the Epson Standard Codes for Printers, Version 2 ESC/P 2. - windows 7
View all Epson Stylus 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
PSB No: P-0101 Page: 2 of 2 Never move the print head assembly from the right capping position by hand. If the printer is turned on with the print head assembly away from the right capping position, it will perform a major cleaning cycle. This cleaning cycle uses up much more ink that the regular cleaning cycle and can greatly shorten the life of the ink cartridge. Never turn the printer off while the print head assembly is moving. The print head assembly will be away from the right capping position and a major cleaning cycle will be performed when the printer is turned on. If it is necessary to turn the printer off while printing, press the PAUSE button and wait until the print head assembly moves to the right and stops before turning the printer off. Before canceling a print job in Windows 3.1, place the printer in PAUSE mode by pressing the PAUSE button. If a print job in Windows 3.1 is canceled, Windows 3.1 will reset the printer. If the print head assembly is not at the capping position, it will perform a major cleaning cycle. Always turn the Stylus 800 printer on after the computer is turned on and completely booted up. If the print head assembly is away from the capping position and the computer is turned on, the computer will reset the printer causing it to perform a major cleaning cycle. Following the above steps will insure that you will get the most out of your ink cartridges. 3. How does the Stylus 800 handle printing on envelopes and legal size paper? The Stylus 800 printer can accommodate a wide variety of paper sizes, but only letter size paper can be handled by the paper feeder. To handle envelopes, legal size paper, and other paper sizes, you must feed them in the manual feed slot. You can feed paper into the manual feed slot without removing the paper in the paper feeder. 4. What printer does the Stylus 800 emulate? The Stylus 800 printer uses the Epson Standard Codes for Printers, Version 2 (ESC/P 2). This command set allows compatibility with Epson's current 24 pin printers and insure backwards-compatibility with Epson's ESC/P printers. 5. What options are available for the Stylus 800? The Stylus 800 does not have any options available.