Epson Stylus C84N Start Here Card - Page 5
OS 8.6 to 9.x - stylus c84 driver
View all Epson Stylus C84N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Macintosh OS 8.6 to 9.x 1 Make sure the Macintosh is properly connected to the network, then turn it on. Make sure the printer and print server are still on. 2 Put the EPSON Printer Software CD in your CD-ROM or DVD drive. 3 Double-click the C84N CD-ROM icon on the desktop (if necessary). 4 Double-click the EPSON Installer icon. You see the EPSON Installation Program window. 5 Double-click Install EPSON Stylus C84N Printer Driver. 6 Follow the on-screen instructions to install the driver and restart your Macintosh. Macintosh OS X 1 After your Macintosh restarts, open the Applications folder, then open the Utilities folder and double-click Print Center. 2 If there are no printers in Print Center, you see a message like this one. Click Add. If the Printer List window appears, Click Add. 3 Depending on your network, select either EPSON AppleTalk or EPSON TCP/IP from the pull-down list. 4 Select your printer, then select All from the Page Setup pull-down list. 5 Click Add. You see the Printer List window with the Stylus C84 Sheet Feeder - Borderless and Standard printer options. NOTE: If you're connecting over a TCP/IP network, your printer is identified by its IP address. To identify the printer's IP address, see the status report you printed out in section 5, "Connect the Print Server." 6 Close Print Center. NOTE: Make sure you select your printer in the Print Setup dialog box in the applications you use. 7 Optionally, double-click the C84N CD-ROM icon on the desktop, and double-click EPSON Installer. • Install the print movies and User's Guide. To do this, double-click Install Printer Movies and User Guide (EPIC). Then double-click the EPSON Printer Info Center icon on the desktop to view the printer movies or User's Guide. • Install EPSON Software Film Factory, a photo management program. To do this, double-click Install EPSON Software Film Factory, and follow the on-screen instructions. • View the print server Administrator's Manual. To do this, double-click View Administrator's Manual. If you don't have Adobe Reader, install it when prompted. 8 Click the icon to close the EPSON Installation Program window, then remove the CD-ROM from the drive. Continue