Epson Stylus COLOR 3000 User Manual - Page 16
and water. If it gets in your eyes, flush them immediately, with water. - ink jet printer
View all Epson Stylus COLOR 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Introduction ◗ Unplug the printer and refer servicing to qualified service personnel under the following conditions: If the power cord or plug is damaged; if liquid has entered the printer; if the printer has been dropped or the cabinet damaged; if the printer does not operate normally or exhibits a distinct change in performance. Adjust only those controls that are covered by the operating instructions. Note the following precautions when using a printer stand with this printer: ◗ Use a stand that can support at least 66.0 lb (30.0 kg). ◗ Never use a stand that tilts the printer. The printer should always be kept level. ◗ Position your cables so they do not interfere with paper feeding; where possible, secure them to a leg of the printer stand. Even if you are familiar with other types of printers, be sure to read through the following list of precautions before operating your ink jet printer: ◗ Do not put your hand inside the printer or touch the print heads during printing. ◗ Under normal circumstances, ink will not come out of the cartridges. If it does get on your skin, wash it off with soap and water. If it gets in your eyes, flush them immediately with water. ◗ Keep ink cartridges out of the reach of children. ◗ Do not dismantle the ink cartridges or try to refill them. This could result in damage to the print head. ◗ Once you install an ink cartridge, do not remove the cartridge except to replace it with a new one. The cartridge may become unusable otherwise. ◗ Install the ink cartridge immediately after you remove it from its package. Leaving the cartridge unpacked for a long time before use may result in reduced print quality. 8