Epson Stylus COLOR 480/480SX Product Information Guide - Page 9

Cleaning the Printer, Transporting the Printer, Related Documentation

Page 9 highlights

EPSON Stylus COLOR 480SX Then enter the number of the best pattern for each row in the corresponding boxes on the screen and click Finish. If there isn't a precisely aligned pattern, enter the number of the best aligned patterns in each row and click Realignment. Another alignment page prints with your selections printed as patterns numbered 8. Repeat step 4 to select a more precise pattern for each row. Cleaning the Printer To keep your printer working at its best, you should clean it several times a year. Follow these steps: 1. Unplug the printer's power cord and disconnect the printer cable. 2. Remove all the paper from the sheet feeder. 3. Clean the exterior of the printer with a soft, damp cloth. 4. Clean ink out of the printer's interior with a soft, damp cloth. Don't touch the gears inside the printer. Never use a hard or abrasive brush, or alcohol or thinner for cleaning; they can damage the printer components and case. Don't get water on the printer components and don't spray lubricants or oils inside the printer. Don't use any cleaning sheets included with special media; they may jam inside the printer. Transporting the Printer If you move your printer some distance, you need to prepare it for transportation in its original box or one of a similar size. Follow these steps: To avoid damage, always leave the ink cartridges installed when transporting the printer. Be sure to remove the tape used in step 4 after installing the printer in its new location. 1. Plug in the printer, wait until the print head locks in the far right position, then unplug the printer. 2. Disconnect the printer cable from the printer. 3. Remove any paper from the printer and remove the paper support. Tape the ink cartridge holder to the printer case 4. Open the printer cover. Secure the ink cartridge holder to the printer with tape as shown, then close the printer cover. 5. Repack the printer and attachments in the original box using the protective materials that came with it. Be sure to keep the printer level as you transport it. After transporting the printer, remove the tape securing the print head and then print a document to test the output. Related Documentation TM-SC480 PL-SC480 CPD-10103 CPD-10104 CPD-10105 EPSON Stylus COLOR 480SX Service Manual EPSON Stylus COLOR 480SX Parts Price List EPSON Stylus COLOR 480SX Printer Basics EPSON Stylus COLOR 480SX Start Here EPSON Stylus COLOR 480SX CD-ROM 6/00 EPSON Stylus COLOR 480SX - 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

EPSON Stylus COLOR 480SX
6/00
EPSON Stylus COLOR 480SX
- 9
Then enter the number of the best pattern for each row in
the corresponding boxes on the screen and click
Finish
.
If there isn’t a precisely aligned pattern, enter the number of
the best aligned patterns in each row and click
Realignment
. Another alignment page prints with your
selections printed as patterns numbered 8. Repeat step 4 to
select a more precise pattern for each row.
Cleaning the Printer
To keep your printer working at its best, you should clean it
several times a year. Follow these steps:
1.
Unplug the printer’s power cord and disconnect the printer
cable.
2.
Remove all the paper from the sheet feeder.
3.
Clean the exterior of the printer with a soft, damp cloth.
4.
Clean ink out of the printer’s interior with a soft, damp
cloth.
Don’t touch the gears inside the printer.
Never use a hard or abrasive brush, or alcohol or thinner
for cleaning; they can damage the printer components
and case.
Don’t get water on the printer components and don’t
spray lubricants or oils inside the printer.
Don’t use any cleaning sheets included with special
media; they may jam inside the printer.
Transporting the Printer
If you move your printer some distance, you need to prepare it
for transportation in its original box or one of a similar size.
Follow these steps:
To avoid damage, always leave the ink cartridges
installed when transporting the printer. Be sure to
remove the tape used in step 4 after installing the printer
in its new location.
1.
Plug in the printer, wait until the print head locks in the far
right position, then unplug the printer.
2.
Disconnect the printer cable from the printer.
3.
Remove any paper from
the printer and remove
the paper support.
4.
Open the printer cover.
Secure the ink cartridge
holder to the printer with
tape as shown, then close
the printer cover.
5.
Repack the printer and
attachments in the original box using the protective
materials that came with it.
Be sure to keep the printer level as you transport it. After
transporting the printer, remove the tape securing the print
head and then print a document to test the output.
Related Documentation
TM-SC480
EPSON Stylus COLOR 480SX Service
Manual
PL-SC480
EPSON Stylus COLOR 480SX Parts Price
List
CPD-10103
EPSON Stylus COLOR 480SX
Printer
Basics
CPD-10104
EPSON Stylus COLOR 480SX
Start Here
CPD-10105
EPSON Stylus COLOR 480SX CD-ROM
Tape the ink cartridge
holder to the printer case