Epson Stylus COLOR 740i Product Information Guide - Page 11

Paper Size setting, Printable Area

Page 11 highlights

EPSON Stylus COLOR 740i Envelopes You can load up to 10 envelopes flap edge first, with the printable side up, as shown below: Note: If the stack of envelopes is more than 0.4-inch (10 mm) thick, press the envelope edges to flatten them before stacking or load one envelope at a time. Select Plain paper as the Media Type and choose the correct envelope size as the Paper Size setting in the printer software. If ink smears when you print on envelopes or other thick media, set the paper thickness lever to the + position as shown below. (Return the lever to the 0 position before printing on other media.) Note: To keep your printouts looking their best, store them in a resealable plastic bag or other airtight covering and protect them from heat, humidity, and direct sunlight. Be sure to support your Panoramic Photo Paper as it ejects from the printer so it doesn't fall onto the floor. Keep the following in mind when using EPSON Photo Paper: t Load the paper with the whiter (glossier) side facing up. t If you're loading Panoramic Photo Paper, pull up the paper support extension. Then load the Panoramic paper and hold up its top edge while you press the E load/eject button to feed it into the printer. Select Photo Paper as the Media Type setting and Panoramic 210 × 594 mm as the Paper Size setting. t If you're loading 4 × 6-inch Photo Paper, follow these steps: 1. Position the perforated margins as shown and load up to 20 sheets with support sheets A and B beneath the stack. EPSON Photo Paper You can use EPSON Photo Paper to print photographs that look almost as good as the ones you get from film processing. 4 × 6-inch Photo Paper is perforated around the edges, so you can trim your printouts and "bleed" the photo-extend it to the edge of the paper-on all sides. You can load up to 20 sheets of 4 × 6-inch, Letter-size, or A4-size Photo Paper or 1 sheet of Panoramic paper at a time. Make sure you place a support sheet beneath the paper if it is included in the paper package. 2. When you create the image you'll print in your application software, size it to 4.25 × 6.25 inches so the image covers the perforations as shown. Trim size Printed image size Choose these printer software settings: Photo Paper as the Media Type setting EPSON Photo Paper 4 × 6 in as the Paper Size setting Maximum as the Printable Area setting. 3. After you print, fold the paper back and forth along the perforations and carefully tear the margins off. 10 - EPSON Stylus COLOR 740i 4/99

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15

EPSON Stylus COLOR 740i
10 -
EPSON Stylus COLOR 740i
4/99
Envelopes
You can load up to 10 envelopes flap edge first, with the
printable side up, as shown below:
Note:
If the stack of envelopes is more than 0.4-inch (10 mm) thick, press
the envelope edges to flatten them before stacking or load one
envelope at a time.
Select
Plain paper
as the Media Type and choose the correct
envelope size as the Paper Size setting in the printer software.
If ink smears when you print on envelopes or other thick
media, set the paper thickness lever to the
+
position as shown
below. (Return the lever to the
0
position before printing on
other media.)
EPSON Photo Paper
You can use EPSON Photo Paper to print photographs that
look almost as good as the ones you get from film processing.
4
×
6-inch Photo Paper is perforated around the edges, so you
can trim your printouts and “bleed” the photo—extend it to
the edge of the paper—on all sides.
You can load up to 20 sheets of 4
×
6-inch, Letter-size, or
A4-size Photo Paper or 1 sheet of Panoramic paper at a time.
Make sure you place a support sheet beneath the paper if it is
included in the paper package.
Note:
To keep your printouts looking their best, store them in a resealable
plastic bag or other airtight covering and protect them from heat,
humidity, and direct sunlight.
Be sure to support your Panoramic Photo Paper as it ejects from the
printer so it doesn’t fall onto the floor.
Keep the following in mind when using EPSON Photo Paper:
Load the paper with the whiter (glossier) side facing up.
If you’re loading Panoramic Photo Paper, pull up the paper
support extension. Then load the Panoramic paper and
hold up its top edge while you press the
E
load/eject button
to feed it into the printer.
Select
Photo Paper
as the Media Type setting and
Panoramic 210
×
594 mm
as the Paper Size setting.
If you’re loading 4
×
6-inch Photo Paper, follow these steps:
1. Position the perforated margins as shown and load up to
20 sheets with support sheets A and B beneath the stack.
2. When you create the
image you’ll print in
your application
software, size it to
4.25
×
6.25 inches so
the image covers the
perforations as shown.
Choose these printer software settings:
Photo Paper
as the Media Type setting
EPSON Photo Paper 4
×
6 in
as the
Paper Size setting
Maximum
as the
Printable Area
setting.
3. After you print, fold the paper back and forth along the
perforations and carefully tear the margins off.
Trim size
Printed
image size