Epson Stylus COLOR 800N User Manual - Epson Stylus RIP Mac & PC - Page 73
The printer is producing s containing illegible, type or characters, Images and type look
View all Epson Stylus COLOR 800N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Troubleshooting The printer is producing pages containing illegible type or characters Possible cause The printer is not receiving and processing PostScript code. Solution Click Cancel in the Information window on a Macintosh or Cancel Printing in the Stylus RIP window on a PC to stop printing. If this doesn't work, turn off the printer to avoid wasting paper. On a Macintosh, halt the Stylus RIP application by holding down the Option and Command keys and then pressing Esc. Restart your Macintosh to establish communication with the printer. Make sure that you correctly performed all the steps in Chapters 1 and 2 (Macintosh) or Chapters 3 and 4 (Windows). On a Windows system, make sure you are printing through the PostScript printer driver, and the port is set to Stylus RIP. On a Windows system, set the Parallel port type to either EPP or ECP mode, See your PC's owner's manual for instructions on changing this setting in your BIOS. Images and type look bitmapped and jagged on your printouts Possible cause You're printing with the standard EPSON non-PostScript driver rather than Stylus RIP. Solution Make sure you start the Stylus RIP program before you start printing. On a Macintosh, make sure you select AdobePS in the Chooser. On a PC, make sure the correct Stylus RIP driver is selected in your application's Print Setup dialog box. 5-5