Epson Stylus NX200 Start Here - Page 3
Load paper - ink cartridges
View all Epson Stylus NX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
6 Close the cartridge cover. Press down until it clicks. 7 Lower the scanner. 8 P ress the Stop button to charge the ink. Charging takes about 21/2 minutes. Caution: Don't turn off the NX200 Series while it is charging or you'll waste ink. 4 Load paper 1 Open the paper support and pull up the extensions. 2 Open the output tray, pull out the extensions, and raise the stopper.
6
Close the cartridge cover. Press down until it clicks.
7
Lower the scanner.
8
Press the
Stop
button to charge the ink. Charging takes about
2
1
/
2
minutes.
Caution:
Don’t turn off the NX200 Series while it is charging or you’ll
waste ink.
Load paper
1
Open the paper support and pull up the extensions.
2
Open the output tray, pull out the extensions, and raise the stopper.
4