Epson Stylus Pro 7880 UltraChrome User's Guide - Page 191
Removing the Manual Media Cutting System
View all Epson Stylus Pro 7880 UltraChrome manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
Installing and Using Optional Equipment | 191 5. Secure the manual cutter with the four screws you removed in step 2. If the cutter has three holes on each side, use the second and third holes from the top. If the cutter has two holes on each side, use the lower hole on each side. Be sure to keep the other two screws. 6. When you are not using the cutter blade, slide it all the way to the left so it will not damage your printouts. 7. See the manual that came with the Manual Media Cutting System for instructions on using the cutter. Removing the Manual Media Cutting System Be sure to remove the manual cutter when you transport the printer. 1. Remove the screws securing the cutter to the printer. 2. Remove the cutter from the printer. 3. Replace the screws on the printer so you do not lose them. 191