Epson Stylus Pro 7880 UltraChrome Printer Guide - Page 67
Optimizing the Settings for Your Paper, Creating Paper Configurations
View all Epson Stylus Pro 7880 UltraChrome manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Handling Paper and Other Media | 69 Optimizing the Settings for Your Paper When you choose a media type in your Epson printer software, the driver automatically determines the best settings for your paper. However, you may want to fine-tune how the printer handles various media-especially if you use non-Epson paper or a paper not supported by the driver. Use the paper configuration settings described below. You can create a special configuration, or group of settings, for each paper type (up to ten types) and select the desired configuration whenever you print on a particular stock. Note: Paper configurations are needed only for non-Epson media. Creating Paper Configurations To create a configuration for a specific paper type, make sure the paper you want to configure is loaded in the printer. Then follow these steps: 1. Press the Menu button, then press the d button until CUSTOM PAPER is highlighted. 2. Press Menu to display PAPER NUMBER. 3. Press Menu, then press the u button to select a paper configuration number (1 to 10). Press the button to save the number setting. 4. Press the l button, then the d button to highlight PLATEN GAP. Press Menu, then press u or d to highlight NARROW, STANDARD, WIDE, or WIDER. (The STANDARD setting is recommended for most paper types.) Press to save the setting. 5. Press the l button, then the d button to highlight THICKNESS PATTERN. 6. Press Menu, then press to print the paper thickness pattern. A pattern similar to the following is printed: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Smallest gap 69