Epson Stylus Pro 7900 Computer To Plate System Printer Guide - Page 179

Solving Problems, Message, Explanation, Response

Page 179 highlights

Solving Problems | 179 Message Explanation Response CANNOT OPEN INK COVER Something is obstructing the indicated ink cover Remove the obstruction and press the button again. CLEANING ERROR AUTOMATIC HEAD CLEANING FAILED RETRY? YES NO Head cleaning did not clear the nozzles. Press to clear the error and run the head cleaning utility again. If cleaning doesn't start, cancel printing from the computer. Then turn the printer off and back on again. CLEANING ERROR NOT ENOUGH INK OR SPACE IN MAINT TANK. CONTINUE CLEANING? YES (RECOMMENDED) NO Not enough ink or not enough maintenance tank capacity for head cleaning. Select Yes and replace the cartridge (see page 159) or maintenance tank (see page 169). COMMAND ERROR CHECK DRIVER SETTINGS You may be using the wrong printer driver. Damaged data was sent to the printer or the data has an incorrect command. Press the Pause/reset button to cancel the print job and reset the printer. Make sure you installed the correct driver for your printer. CUTTER UNIT NEARING END OF SERVICE LIFE. RECOMMEND REPLACING THE CUTTER UNIT The paper cutter may be dull. Replace the paper cutter; see page 165. FRONT COVER OPEN Front cover is open. Close the front cover. CLOSE COVER F/W INSTALL ERROR UPDATE FAILED RESTART THE PRINTER Firmware update failed. Restart the printer, then update the firmware again; see page 54. INK CARTRIDGE The ink cartridge is expended. Replace the ink cartridge; see page 159. INK LOW REPLACE INK CARTRIDGE INK CARTRIDGE NON-GENUINE CARTRIDGE! QUALITY OF NON-GENUINE INK MAY VARY. A non-genuine ink cartridge is installed. Select DECLINE and replace the ink cartridge with a genuine Epson ink cartridge; see page 159. INK CARTRIDGE PLEASE USE GENUINE EPSON INK CARTRIDGES A non-genuine ink cartridge is Replace the ink cartridge with a genuine installed. Epson ink cartridge; see page 159. 179

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208

179
Solving Problems
|
179
CANNOT OPEN INK COVER
Something is obstructing the
indicated ink cover
Remove the obstruction and press the
button again.
CLEANING ERROR
AUTOMATIC HEAD
CLEANING FAILED
RETRY?
YES
NO
Head cleaning did not clear the
nozzles.
Press
to clear the error and run the
head cleaning utility again. If cleaning
doesn’t start, cancel printing from the
computer. Then turn the printer off and back
on again.
CLEANING ERROR
NOT ENOUGH INK OR
SPACE IN MAINT TANK.
CONTINUE CLEANING?
YES (RECOMMENDED)
NO
Not enough ink or not enough
maintenance tank capacity for
head cleaning.
Select
Yes
and replace the cartridge (see
page 159) or maintenance tank (see
page 169).
COMMAND ERROR
CHECK DRIVER SETTINGS
You may be using the wrong
printer driver.
Damaged data was sent to the
printer or the data has an
incorrect command.
Press the
Pause/reset button to
cancel the print job and reset the printer.
Make sure you installed the correct driver
for your printer.
CUTTER UNIT NEARING
END OF SERVICE LIFE.
RECOMMEND REPLACING
THE CUTTER UNIT
The paper cutter may be dull.
Replace the paper cutter; see page 165.
FRONT COVER OPEN
CLOSE COVER
Front cover is open.
Close the front cover.
F/W INSTALL ERROR
UPDATE FAILED RESTART
THE PRINTER
Firmware update failed.
Restart the printer, then update the
firmware again; see page 54.
INK CARTRIDGE
INK LOW REPLACE INK
CARTRIDGE
The ink cartridge is expended.
Replace the ink cartridge; see page 159.
INK CARTRIDGE
NON-GENUINE CARTRIDGE!
QUALITY OF NON-GENUINE
INK MAY VARY.
A non-genuine ink cartridge is
installed.
Select
DECLINE
and replace the ink
cartridge with a genuine Epson ink cartridge;
see page 159.
INK CARTRIDGE
PLEASE USE GENUINE
EPSON INK CARTRIDGES
A non-genuine ink cartridge is
installed.
Replace the ink cartridge with a genuine
Epson ink cartridge; see page 159.
Message
Explanation
Response