Epson Stylus Pro 9600 User Manual - Page 141
Replacing Ink Cartridges, Checking Ink Levels
View all Epson Stylus Pro 9600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Maintaining and Transporting the Printer | 141 TIP You can store partially used ink cartridges for up to 6 months. Replacing Ink Cartridges Before you begin a large print job, you should check your ink levels. If one of your cartridges is low, you can replace it before you start. Or you can wait until the ink runs out, replace the cartridge, and then continue the job without any loss of print quality. Checking Ink Levels The easiest way to check ink levels is from the control panel: (almost (full) empty) black* black* cyan magenta light cyan light magenta yellow * If your printer uses UltraChrome ink, the black ink cartridges may be a combination of Photo Black, Matte Black, or Light Black. See page 146 for information on switching between black print modes. When one of the Ink Out lights is flashing (and INK LOW is displayed on the control panel), the corresponding cartridge is almost out of ink. Make sure you have a replacement cartridge. When the light stays on and INK OUT is displayed, the cartridge is empty. You must replace the cartridge before you can continue printing. 5-141