Epson Stylus Pro 9880 UltraChrome Network Guide - Page 7
Network Interface Operation
View all Epson Stylus Pro 9880 UltraChrome manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
❏ Supports Bonjour on Mac 10.4.x and above. Network Interface Operation Status lights The indicator lights on the network interface provide you with important information on the operation of the network interface. Orange light indicates100Base-TX connection Flashes green when data is received The light on the left side indicates whether the network interface is connected to 10Base-T or 100Base-TX. The light is orange when the connection is 100Base-TX, green when the connection is 10Base-T. The light on the right side is a data transmission light that flashes when the host interface receives data. If the light on the left side is solid green and the light on the right side is off, the connection is disconnected. Network connector RJ-45 connector: This connector is used to connect an Ethernet cable to a network. You can use this cable for both 10Base-T and 100Base-TX. c Caution: You must use a Category-6 shielded twisted-pair cable to connect the network interface to a network to prevent malfunctions. Introduction 7