Epson SureColor F2000 Start Here - Page 2
Product Support, Need Ink?, Install Ink Cartridges, Install Software & Drivers, Perform Nozzle - dtg
View all Epson SureColor F2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Install Ink Cartridges Caution: You cannot change the ink configuration (for example, White Edition to Color Edition or Color Edition to White Edition) after the ink cartridges have been installed. 1 Remove the ink cartridges from their packages, and then gently shake each cartridge for about 15 seconds on each side as shown. 2 Open the ink covers and install each cartridge into the correct slot for its color. Caution: Do not touch the green chip on top of the cartridge. Install Software & Drivers 1 Go to epson.com/support/f2000 (U.S.) or epson.ca/support/f2000 (Canada) to download the Garment Creator software and Drivers & Utilities Combo Package. 2 After you install the software, open the LFP Remote Panel and check for a firmware update. Perform Nozzle Check 1 Remove the platen's frame. White Edition Left ink bay Slot 1 Slot 2 Slot 3 WH WH Y Right ink bay Slot 4 Slot 5 Slot 6 M C BK Color Edition Left ink bay Slot 1 Slot 2 Slot 3 BK Y M Right ink bay Slot 4 Slot 5 Slot 6 M C C 3 Close the ink covers. 2 Make sure the height adjustment lever is at the "P" position. 3 Press the button on the control panel. The Maintenance menu is displayed. 4 Press the / buttons to highlight Nozzle Check, and then press the button. 5 Press the OK button twice. 9 Replace the platen's frame. Product Support Online User's Guide Instructions for using your printer and maintenance tools. On-screen help with your software Select Help or F1 when you're using your Garment Creator software. Epson technical support Internet support Visit your product's support website at epson.com/support/f2000 (U.S.) or epson.ca/support/f2000 (Canada) to download the Garment Creator software and utilities, access the online User's Guide, get FAQs and troubleshooting advice, or e-mail Epson with your questions. Epson PreferredSM Protection Plan Call (888) 377-6611. Make sure you have your Epson Preferred Unit ID number. If you have any difficulty with this service, call (562) 276-1305. You can purchase a one-year extended service plan through your Epson authorized reseller or from Epson. Need Ink? You can purchase ink from an Epson DTG authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). 4 Press the button. 5 Follow the prompts to select Language, set Date & Time, and select unit of measurement. 6 Press the button. 7 Press OK at each of the confirmation prompts. The printer starts charging the ink. This takes about 40 minutes. The LCD displays Standby when the charging is complete. Caution: Do not turn off or unplug the printer while the during the charging process. light is flashing. Also, do not open the ink covers Note: The first time you install ink cartridges, the printer uses some ink to charge the printing system, so print yields may be lower with the first cartridges. Subsequent ink cartridges will last for their full rated life. 6 The nozzle check pattern is printed directly onto the platen. 7 Check the pattern. If there are no gaps, the nozzles are clean. If there are gaps in the pattern, refer to the online User's Guide for instructions on cleaning the print head. 8 Clean the platen using a cloth dampened with window cleaner or water. EPSON and SureColor are registered trademarks and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. Epson Preferred is a service mark of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice. © 2013 Epson America, Inc., 12/13 Printed in USA CPD-40254