Epson SureColor F570 Start Here - Installation Guide - Page 2

Fill Ink Tanks, into the tank and stops automatically when the ink tank is filled to - printer

Get Epson SureColor F570 PDF manuals and user guides View all Epson SureColor F570 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

10 Open the cut sheet cover and remove the tape inside the printer. 3 Gently shake the black (BK) ink bottle for about 5 seconds. 11 Open and fold back the roll paper cover. 4 Unpack the black (BK) ink bottle. Hold the ink bottle upright and slowly turn the bottle cap to remove it. 12 Remove the tape and the protective pieces. Caution: Do not squeeze the ink bottle. Do not touch the top of the ink bottle after its cap is removed. 5 Insert the ink bottle into the filling port, as shown below. 13 Close the roll paper cover and the cut sheet cover. 14 Dispose of all the tape and the protective pieces. Fill Ink Tanks Note: • Epson cannot guarantee the quality or reliability of third-party ink. • Use the ink bottles included with the printer to set up the product. Part of the ink will be used to charge the print head. These bottles may print fewer pages compared with replacement ink bottles. 1 Open the ink tank cover. 2 Open the cap for the black ink. 6 Wait for the ink to fill the tank. Do not squeeze the bottle. Ink flows into the tank and stops automatically when the ink tank is filled to the upper line. Note: If ink does not flow from the bottle, lift and reinsert the bottle. Caution: After setup, periodically inspect the ink level to ensure it is not below the lowest line on the tank. Prolonged use when ink is below the lowest line could damage the product. See the online User's Guide for refilling instructions. 7 When the ink tank is full, remove the ink bottle and replace the bottle cap. Place the remaining ink aside; you will need it later. Note: Do not leave the ink bottle inserted; otherwise the bottle may be damaged or ink may leak.

  • 1
  • 2
  • 3
  • 4
10
Open the cut sheet cover and remove the tape inside the printer.
11
Open and fold back the roll paper cover.
12
Remove the tape and the protective pieces.
13
Close the roll paper cover and the cut sheet cover.
14
Dispose of all the tape and the protective pieces.
Fill Ink Tanks
Note:
•
Epson cannot guarantee the quality or reliability of third-party ink.
•
Use the ink bottles included with the printer to set up the product. Part of the
ink will be used to charge the print head. These bottles may print fewer pages
compared with replacement ink bottles.
1
Open the ink tank cover.
2
Open the cap for the black ink.
3
Gently shake the black (BK) ink bottle for about
5 seconds.
4
Unpack the black (BK) ink bottle. Hold the ink bottle upright and
slowly turn the bottle cap to remove it.
Caution:
Do not squeeze the ink bottle. Do not touch the top of the ink bottle
after its cap is removed.
5
Insert the ink bottle into the filling port, as shown below.
6
Wait for the ink to fill the tank. Do not squeeze the bottle. Ink flows
into the tank and stops automatically when the ink tank is filled to the
upper line.
Note:
If ink does not flow from the bottle, lift and reinsert the bottle.
Caution:
After setup, periodically inspect the ink level to ensure it is not
below the lowest line on the tank. Prolonged use when ink is below the lowest
line could damage the product. See the online
User's Guide
for refilling
instructions.
7
When the ink tank is full, remove the ink bottle and replace the bottle
cap. Place the remaining ink aside; you will need it later.
Note:
Do not leave the ink bottle inserted; otherwise the bottle may be
damaged or ink may leak.