Epson SureColor F7170 Setup Guide - Page 19
Installing the Take-up Reel System
View all Epson SureColor F7170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Installing the Take-up Reel System | 19 8. Make sure the communication cable is fully seated in the port and then close the port cover. Installing the Take-up Reel System You need the following parts to assemble and attach the take-up reel system: 13 a Note: Make sure the bracket is oriented correctly when you attach it. 1. Attach the brackets to the front of the printer using two C screws on each side as shown.
Installing the Take-up Reel System
|
19
8.
Make sure the communication cable is fully seated in the port and then close the port cover.
Installing the Take-up Reel System
You need the following parts to assemble and attach the take-up reel system:
Note:
Make sure the bracket is oriented correctly when you attach it.
1.
Attach the brackets to the front of the printer using two C screws on each side as shown.
13
a