Epson SureColor F9470H Users Guide - Page 159

LCD screen message Solution Maintenance Request Replace Part Now/Replace Part Soon XXXXXXXXXX The indicated product part is nearing or at the end of its service life. Contact Epson for support and provide them with the service code shown on the LCD screen. You must replace the part before printing again. If you continue to print, a call for service occurs. Call For Service A call for service occurs when: XXX Error XXX • The power cable is not connected securely Power off and then on. If • An error occurs that cannot be cleared this doesn't work, note the code and call for service. When a call for service has occurred, the printer automatically stops printing. Turn off the printer, disconnect the power cable from both the outlet and the printer, and then reconnect them. Turn the printer on and off several times. If the same call for service is displayed on the LCD screen, contact Epson for support and provide them with the service code shown on the LCD screen. Parent topic: Solving Problems Related references Where to Get Help Environmental Specifications Media Setup Menu Settings Printer Setup Menu Settings Related tasks Replacing the Waste Ink Bottle Replacing the Chip Unit and Refilling Ink Cleaning the Print Head Solving Printer Problems Check these sections if you have problems operating your product. Printer Does Not Turn On LCD Screen Shuts Off After Heater Shuts Off Forgot the Administrator Password Red Light Shines Inside the Printer 159