Epson SureColor P600 Start Here - Page 2
Load paper, Sheet feeder, Front manual feed tray - ink cartridges
View all Epson SureColor P600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
3 Remove only the yellow tape from each cartridge. Caution: Don't remove any other seals or the cartridges may leak. 4 Insert the cartridges in the holder for each color. 5 Press the cartridges down until they click. 6 Close the cartridge cover, then close the printer cover. Load paper Sheet feeder You can load plain paper, and most glossy and matte papers, in the sheet feeder. 1 Open the paper support and pull up the extensions. 2 Open the front cover, then extend the output tray. 3 Load paper against the right edge and behind the tab. Then press the button on the edge guide and slide it to the edge of the paper. 7 The printer begins priming the ink delivery system. This takes about 10 minutes. Do not turn off the printer, load paper, or open any covers until the process is complete. Note: • The printer is designed for use with Epson® cartridges only, not third-party cartridges or ink. • The cartridges included with the printer are designed for printer setup and not for resale. After some ink is used for priming, the rest is available for printing. Caution: Don't turn off the printer while it is priming or you'll waste ink. Note: Don't load the paper sideways. Always load it short edge first. Front manual feed tray You can print on these fine art media using the front manual feed tray: • Epson Velvet Fine Art Paper • Epson Watercolor Paper Radiant White • Epson Exhibition Watercolor Paper Textured • Epson® UltraSmooth® Fine Art Paper • Epson Exhibition Fiber Paper • Epson Hot Press Bright • Epson Hot Press Natural • Epson Cold Press Bright • Epson Cold Press Natural Note: For instructions on loading roll paper, a CD or DVD, or thick media, see the Basics guide.