Epson SureColor P6000 Standard Edition User Manual - Page 44

Configuring the printer for your network, Start EpsonNet Config.

Get Epson SureColor P6000 Standard Edition PDF manuals and user guides View all Epson SureColor P6000 Standard Edition manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

Configuring the printer for your network | 43 3. Click Firmware. 4. Click Download. 5. Double-click the firmware file that you downloaded. Note: Make sure your printer is turned on and connected to your computer or network before you run the firmware file. 6. Follow the on-screen instructions to install the new firmware on your printer. Caution: Don't turn off the printer while the firmware is updating. The printer automatically turns off when the firmware update is complete. If you connected to your printer through a network, follow the instructions in the next section to configure the printer for your network. Configuring the printer for your network Once the printer is connected to your network, follow these steps to configure it: 1. Turn on the printer. 2. Start EpsonNet Config. EpsonNet Config searches for all Epson printers on the network and displays the MAC address for each printer that it finds. 3. Highlight the printer you want to configure and click Configuration to access the TCP/IP selection screen. 4. If necessary, contact your network administrator for instructions on assigning an appropriate IP address. A static IP address is recommended.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
Configuring the printer for your network
|
43
3.
Click
Firmware
.
4.
Click
Download
.
5.
Double-click the firmware file that you downloaded.
Note:
Make sure your printer is turned on and connected to your computer or network before you run the
firmware file.
6.
Follow the on-screen instructions to install the new firmware on your printer.
Caution:
Don’t turn off the printer while the firmware is updating. The printer automatically turns off when
the firmware update is complete.
If you connected to your printer through a network, follow the instructions in the next section to
configure the printer for your network.
Configuring the printer for your network
Once the printer is connected to your network, follow these steps to configure it:
1.
Turn on the printer.
2.
Start EpsonNet Config.
EpsonNet Config searches for all Epson printers on the network and displays the MAC address for
each printer that it finds.
3.
Highlight the printer you want to configure and click
Configuration
to access the TCP/IP selection
screen.
4.
If necessary, contact your network administrator for instructions on assigning an appropriate IP
address. A static IP address is recommended.