Epson SureColor P9000 Commercial Edition User Manual - Page 16
LAN or High-Speed Internet, Internet Protocol TCP/IP
View all Epson SureColor P9000 Commercial Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
1. Click Start, highlight Control Panel, and then click Network and Internet Connections. Select Network Connections. 2. Under LAN or High-Speed Internet, click the Local Area Connection icon. 3. Under Network Tasks, click Change settings of this connection. 4. Check if the following necessary components are in the list. The following table lists the components required for configuring the network interface with EpsonNet Config. EpsonNet Config's setting screens TCP/IP, WSD, UPnP, Bonjour Necessary components Internet Protocol (TCP/IP) The following table lists the components required for network printing. Printing method TCP/IP printing Necessary components Internet Protocol (TCP/IP) 5. Double-click Internet Protocol (TCP/IP) on the Local Area Connection Properties dialog box to open the Internet Protocols (TCP/IP) Properties dialog box. Set the IP address, the subnet mask, etc. and then click OK. 6. Restart the computer. The necessary components are now installed. Go to the section "Setting Up the Network Interface" on page 18. How To 16