Epson SureColor P9000 Standard Edition User Manual - Page 42
Connecting to your system, your computer's network interface, you need an RJ-45 CAT-6 crossover cable.
View all Epson SureColor P9000 Standard Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Connecting to your system | 41 Connecting to your system You can use a USB and/or an Ethernet network connection. For a USB connection, make sure your system has the appropriate port and you have a standard, shielded cable 10 feet (6 m) long or less. To connect to a network hub, you need a standard RJ-45 CAT-6 network cable. To connect directly to your computer's network interface, you need an RJ-45 CAT-6 crossover cable. 1. Make sure that both the printer and the computer are turned off. 2. Plug the cable into the appropriate port on the printer. USB connection Network connection Note: Route the communication cable (USB or Ethernet) through the cable guide not used by the power cord. 3. Plug the other end of the cable into the appropriate port on your computer, network switch, or hub.