Epson SureColor T5000 Setup Guide - Page 4

2 | Unpacking and Assembling the Printer Unpacking and Assembling the Printer Note: Unless otherwise indicated, the illustrations in this manual show the SureColor® T7000, but the instructions apply to all three models. Before beginning assembly, make sure you have sufficient space to set up and use the printer. The following illustration shows the minimum space required for using the printer: 5.9 in. (150 mm) 0.4 in. (10 mm) 23.6 in. (600 mm) 5.9 in. (150 mm) When choosing a place for the printer, leave adequate room for easy access and ventilation. Avoid locations subject to direct sunlight, excessive heat, humidity, or dust. Be sure the printer is placed on a flat, stable location that can support the following weight for each printer: • SureColor T3000 - 112 lb (51 kg) • SureColor T5000 - 165 lb (75 kg) • SureColor T7000 - 180 lb (82 kg) WARNING: Two people are required to unpack and install the SureColor T3000 printer; four people are recommended to unpack and install the SureColor T5000 or SureColor T7000 printer. You need an even larger floor space to assemble the printer and stand, so be sure to prepare a large, clear area before unpacking them. Also make sure you save the box and packaging in case you need to ship the printer later.