Epson TM-H6000IV-DT Technical Reference Guide - Page 69
Connecting External Devices, Connecting a Mouse and Keyboard, Connecting a Display
View all Epson TM-H6000IV-DT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Chapter 2 Setup Connecting External Devices Connect external devices as necessary. If you connect external devices, connect each cable to the connector on the back of the product. When connecting an external device to a USB connector, be sure to check this product and the device's manual for the amount of power consumed by the exter- CAUTION nal device. When connecting external devices to the USB and powered USB ports, follow the pre- cautions below. Confirm the rated current of the external devices by checking the descriptions on the devices or manuals. Do not use a device whose rated current is unclear. Connect the external devices only when those total power consumption is 30 W or less. When you use powered USB ports, make sure that the TM-H6000IV-DT is turned off before connecting each cable. When the powered USB mode (See "Powered USB mode setting" on page 73.) is set to Mode 2, also make sure that the AC cable is dis- connected from a power outlet before connecting it. 2 When pulling out the cables whose connectors do not lock themselves (USB cables and Line-Out cable), pass the cables through the wire saddle to prevent the cables from coming off. Connecting a Mouse and Keyboard Connect a USB mouse and USB keyboard to the USB. Connecting a Display Connect a display to the VGA or the DisplayPort connector. Connect the display when this product is off. If you connect the display when this product is on, data may not be properly displayed. 69