Epson TM-L90 Plus-i KDS Configuration Guide - Page 11
Print Tile on Bump at POS
View all Epson TM-L90 Plus-i KDS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Setting Description IP Address MAC Address Attached to POS Is Printer Printing Functions Settings Setting Print Chit Print Item on Bump Print Tile on Bump Print Tile on Bump at POS Description Enter a description for the device, such as its location or specific function. Sets the IP address for the device if it was not discovered automatically. If you enter the IP address for a device that is currently connected to the network, the configuration utility automatically detects the device's MAC address. You cannot change the IP address if you already entered a MAC address for the device. Sets the MAC address for the device if it was not discovered automatically. If you enter the MAC address for a device that is currently connected to the network, the configuration utility automatically detects the device's IP address. You cannot change the MAC address if you already entered an IP address for the device. Sets the current device as the master device that controls the KDS. You cannot make a KDS expansion module the master device; only TM-U220-i, TM-T88V-i, or TM-L90 Plus-i LFC printers can be master devices. Selects whether the device is a printer. Description Select to print a chit when an order is placed for the printer attached to the POS terminal. Select to print an item when it is bumped off an order. Select to print a tile when the order is bumped. Select to print a tile at the POS when the order is bumped for printers not attached to the POS terminal. 11