Epson TM-P80 Plus Setup Guide Wi-Fi / Bluetooth - Page 2
Installing Software, Settings Using APD, Settings Using UPOS, Using the Utility Software for Pairing
View all Epson TM-P80 Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
1 Installing Software Download and install the following software in the setup PC: Utility software (TM Bluetooth® Connector) Printer Driver (APD, UPOS) Note: Choose the Printer Driver (APD, UPOS) in accordance with the user's environment. The utility software is installed automatically when installing APD. Download Site For customers in North America: http://www.epson.com/support/ For customers in other countries: https://download.epson-biz.com/?service=pos 2 Settings Using APD APD launches the utility software during installation. Then, start the pairing process. A Execute the APD installer. B Install APD by following the instructions displayed on the screen. C The "Register, Change and Delete EPSON TM printer" window appears. From the "Port Type" pull-down list, select [Bluetooth]. D From the "Port" pull-down list, select [Auto setup] and click [Save Settings]. E When the message "Start pairing now?" appears, click [Y]. F When the utility software is launched, start the pairing process. (For details, see "4. Using the Utility Software for Pairing".) G Exit the utility software, and the "Register, Change and Delete EPSON TM printer" window of APD appears. Confirm that "Port" displays "ESDPRTxxx". H Click [Finish]. Installation is completed. Note: For a system with a printer shared by multiple computers, set the status monitoring to [Do Not Monitor] in the printer properties in APD. Follow the steps below. 1. Click [Start] - [Device and Printers] to display the device and printers. 2. Right-click a print queue and click [Printing Preferences]. 3. The printer properties are displayed. Select the [Port] tab and click [Configure Port...]. 4. The "Configure Port" window appears. From the "Status Monitoring" pull-down list, select [Do Not Monitor] and click [OK]. 5. The screen returns to the printer properties window. Click [Close]. 3 Settings Using UPOS After installing UPOS, register a printer using SetupPOS. Then, pair the printer using the utility software. A Install UPOS in accordance with the user's environment. Installing OPOS ADK 1. Double-click Setup.exe to start the installer. 2. Perform installation by following the instructions displayed on the screen. 3. During installation, the "Port selection" window appears. Select the [Bluetooth port] checkbox and click [Next]. Installing OPOS ADK for .NET 1. Double-click Setup.exe to start the installer. 2. Perform installation by following the instructions displayed on the screen. Installing JavaPOS ADK 1. Double-click EPSON_JavaPOS_ADK_xxxxx.exe to start the installer. 2. Perform installation by following the instructions displayed on the screen. B Add a printer using SetupPOS. Follow the steps below. (The following explanation takes OPOS ADK as an example.) 1. Right-click "POSPrinter" at the left side of the window and select [Add New Device...]. The "Add New Device [Select DeviceNameKey]" window appears. 2. From the "Select Device Name" pull-down list, select the printer type to be used. Click [Next]. 3. Click [Make Port]. 4. The "TMPORT Making" window appears. Select [Bluetooth] from "Port Type" and [COMx] from "Physical Port (Only COM and LPT)". The port name to be newly added is displayed in "Make Port Name". Remember this port name. Note: The created TMPORT number corresponds to the "ESDPRTxxx" number displayed in the Assign Port dialog box in the utility software. Selecting [ESDPRTxxx (UPOS for TM-Pxx)] displayed here enables pairing. 5. Click [OK]. The screen returns to the "Add New Device [Communication Settings]" window. 6. Click [Finish]. The printer is added. C Start the pairing process using the utility software. (For details, see "4. Using the Utility Software for Pairing".) This completes UPOS setup and pairing. 4 Using the Utility Software for Pairing This section describes how to use the utility software for pairing. A Turn on the printer. B Select [Search all printers around this computer] and click [Search]. C Select the printer to be paired ( Not been paired yet) and click [Connect]. D If the window to enter a passkey appears, enter a passkey and click [OK]. Initial passkey: 0000 E The "Assign port" window appears. Select the port to be used from the pull-down list and click [OK]. If started from the APD installer, port setting automatically starts without displaying the "Assign port" window. APD print queue : ESDPRTxxx(TM-Pxx: Queue name) UPOS : ESDPRTxxx (UPOS for TM-Pxx) ESC/POS command : Displayed virtual COM port (e.g. COM4) F The "Connection complete" window appears. Click [Test Buzzer] or [Test Printing] to check operation. The printer buzzer sounds or printing starts. G Click [Back to Main] to return to the main window. H Click the "x" button of the utility software to exit. 5 Troubleshooting If [Search] is clicked on the utility software, "ERROR" is displayed. Check whether: The Bluetooth adapter is installed to the computer. Bluetooth is ON in the Windows settings. The device is not displayed on the utility software. Or, the utility software's Status is " " after pairing. Check whether: The printer power source is 10 m or less away from the computer power source. Confirm that there is no other wireless device, such as a microwave oven and cordless telephone, that can interfere with the Bluetooth printer. Make sure that the printer and the computer are in the same room. If the utility software's search time is short, it is difficult to detect printers. Change the search time according to TM Bluetooth® Connector User's Manual. While a computer and printer are communicating, the printer cannot be detected by other computers. Confirm that the printer to be detected is not communicating with any computer. After pairing, the utility software's Status is " Not been paired yet". The printer is not paired. Perform pairing again. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. While every precaution has been taken in the preparation of this book, Seiko Epson Corporation assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation. EPSON is a registered trademark of Seiko Epson Corporation. Exceed Your Vision and ESC/POS are registered trademarks or trademarks of Seiko Epson Corporation. Wi-Fi® and WPA2™ are either registered trademarks or trademarks of Wi-Fi Alliance®. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Seiko Epson Corporation is under license. Windows is registered trademarks of Microsoft Corporation. All other trademarks are the property of their respective owners and used for identification purpose only. © Seiko Epson Corporation 2014-2016. All rights reserved. Printed in China