Epson TW1000 User Guide - Page 10
RS-232C] port - replacement lamp
View all Epson TW1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Part Names and Functions Rear • [Component] input port p.12 • [SCART] input port p.12 Connects to the component (YCbCr or YPbPr ) out port of the video equipment. Connects to the component (YCbCr or YPbPr) out port or D out port of the video equipment. • [PC] input port p.12 Connects to the RGB out port of the computer. • [HDMI ] input port p.12 Connects to video equipment or a computer that is HDMIcompatible. • [Trigger out] port When the projector power is turned on, a 12 V DC signal is output from this port. When the projector's power is turned off or a problem with operation occurs, the output becomes 0 V to send the projector's power ON/OFF status to an external device. • Remote control light-receiving area p.13 Receives signals from the remote control. • Security lock p.55 • [Video] input port p.12 Connects to general video out ports of the video equipment. • [S-Video] input port p.12 Connects to the S-Video out ports of the video equipment. • Main power switch p.14 • Power inlet p.14 Connects the power cable. • [RS-232C] port Connects the projector to a computer using an RS-232C cable. This port is for control use and should not be used by the customer. Base • Suspension bracket fixing points (4 points) p.48 Install the optional ceiling mount here when suspending the projector from a ceiling. • Lamp cover p.46 • Air filter (air intake vent) p.44, 46 Open this cover when replacing the lamp inside. Prevents dust and other foreign particles from being drawn into the projector. It should be cleaned periodically. 8